1. Advanced ShieldClad - 10mm rigid PVC panel Installation and Fitting
Installation
Advanced Rigid Panelling is a very versatile system
which can be easily installed in almost any building.
Wall Preparation
Walls should be reasonably level and flat. If not, then the
trims may be set onto battens to ‘float’ over high sections.
Cutting
A jigsaw is the best method of cutting the sheeting.
A fine toothed hand saw can also be used.
Jointing
2 part H and J Trims are used
Internal/external corners
Advanced PVC is normally routed, so window and door reveals
are neatly clad without an edge joint.
Fixing
Panels are held with PVC trim system.
Typical panel layout
This shows part of panel system set
away from wall to accommodate services.
Fitting
This rigid solid panel is ideal for walls that are unsuitable for Advanced single skin claddings e.g. uneven, damp, or services may be required
to run behind the panels. It provides a hygienic solid sealed finish ideal for food, catering, pharmaceutical, kitchens and laboratories.
‘H’ Trim End stop / ‘J’ Trim
Female section of 2 part ‘H’-trim is mechanically fixed Used at top, bottom and when
to substrate and sheets are offered then male section is starting / finishing cladding.
push-fitted to provide a solid sealed joint. N.B. Panels
can be removed for inspection/replacement if required
Sound / Dry substrate
Advanced panel adhesive
Advanced PVC ‘H’ Trim
Advanced PVC
Advanced PVC
Advanced ‘J’ Trim
Advanced
panel adhesive
Sound / Dry substrate
Advanced Hygienic Contracting reserve the right to change any product specification, design or description without prior notice.
No responsibility or liability can be accepted for any loss or damage arising from any error or omission contained in this document.
T 0330 100 0313 F 0330 100 0314 advanced@cladding.co.uk www.cladding.co.uk
Advanced Hygienic Contracting Ltd, Unit A1, Greengate, Cardale Park, Harrogate HG3 1GY Registered in England No. 3046845 VAT No. 664810624
2. Advanced ShieldClad - 10mm rigid PVC panel Installation and Fitting
Fitting
Internal / External corners Window / Door openings
Most cladding is fabricated on site and angles are carefully
routed to give a smooth, easy to clean strong finish. Advanced ‘J’ Trim
Advanced PVC
Internal / External
routed angles
Advanced PVC Foodsafe silicone sealant
Sound / Dry substrate
Advanced panel adhesive
Resin floor detail Quarry tile floor detail Panel set off wall
Sound / Dry
Advanced PVC Advanced PVC substrate
Battens
Advanced ‘J’ Trim Advanced ‘J’ Trim
Foodsafe silicone Foodsafe silicone
sealant sealant
Sound / Dry substrate
Sound / Dry substrate
Resin Quarry tile skirting
Advanced PVC
Minimum ‘H’ Trim
100mm
self cove
Advanced PVC
This allows services to
be run behind panels
Quarry tile
and sockets mounted
on panel face
Advanced Hygienic Contracting reserve the right to change any product specification, design or description without prior notice.
No responsibility or liability can be accepted for any loss or damage arising from any error or omission contained in this document.
T 0330 100 0313 F 0330 100 0314 advanced@cladding.co.uk www.cladding.co.uk
Advanced Hygienic Contracting Ltd, Unit A1, Greengate, Cardale Park, Harrogate HG3 1GY Registered in England No. 3046845 VAT No. 664810624